alpha-400 in parts

Discussions about the Alpha-400 sub-notebook

alpha-400 in parts

Postby tommy-turtle » Sat Dec 20, 2008 8:01 am

Well I have had this less then 24 hours and some things were fine, but it was a little slow, So I wanted to know about the ram upgrade. The reason I bought this was to have a device the could be modded with a little work to help some friends in the deaf community have a communication device when there was not an interpreter around. Well this will take some work to work, I just took photos to see it all in parts. Also was not afraid of bricking (making a desk paper weight) this that much as much as other one that actually do function well. I will get a photo of the screw that is hidden.

here you go and the link to all of them is

http://smg.photobucket.com/albums/v221/ ... %20%20400/

comparison between 2 machines
Image

the two screws that hold down the keyboard. One you can see the other you have to cut through the warning sticker on the back to get it out. I will retake that photo soon and post it for you. I think re doing the ribbon cable for the mouse was harder then the keyboard. the keyboard is the same as the Tonka net book (sylvania g meso book) but the zzz is a G in a circle on the G.

keyboard
Image

Image

Image

top side of the motherboard

Image

one of the screws to get the mother board off (bottom right screw is black)

Image

the other screw to get the mother board off(upper left screw is black)

Image

those were taken after taking off the screen, So I cheated that some

back side

Image

Image



processor
Image

Image

the ram(the more i look at this the more i think i am wrong)

Image

I know there are some of the photos that are poor quality, but I was using a 5 year old digital camera that has been dropped a few dozen times.
tommy-turtle
Newbie
 
Posts: 7
Joined: Tue Dec 16, 2008 8:35 am

Re: alpha-400 in parts

Postby Dani » Thu Feb 19, 2009 8:42 pm

hi Tommy,
did you pursue the ram upgrade possibility any further?
Dani
Newbie
 
Posts: 7
Joined: Thu Feb 19, 2009 8:38 pm

Re: alpha-400 in parts

Postby tommy-turtle » Fri Feb 20, 2009 8:21 am

I have looked into doing it, but am practising my soldier skill first with used calculators from the 2nd hand store first before I smoke $150. I have been reading on the better wifi before I try the ram.
tommy-turtle
Newbie
 
Posts: 7
Joined: Tue Dec 16, 2008 8:35 am

Re: alpha-400 in parts

Postby Dani » Fri Feb 20, 2009 10:47 pm

alright. When you do go ahead with the upgrade, please share the details.

cheers
Dani
Newbie
 
Posts: 7
Joined: Thu Feb 19, 2009 8:38 pm


Return to Alpha-400

Who is online

Users browsing this forum: No registered users and 2 guests

cron